Be sure and check your config archive to ensure it provides what you want. When we did the same for a 4402 WLC, then config that was archived was essentially the 'show run-config' output. This is very different from, and much less complete than, the XML file generated by doing a config backup via the controller's web interface. Since we use WCS I did not test anything further, but I would urge you to ensure that the archive provides you with the recoverability that you need (or that you know what other pieces you need to ensure the full recovery of a failed/dead controller).

Hi Hafiz, Kindly let me know how you are adding device to CiscoWorks LMS 2.6. As a best practise, when you will add new device to CiscoWorks, you should not select. Chaps, This is a new install of LMS 3.2 with the Campus Manager patched to 5.2.1. I'm unable to install any new device updates, if I use the GUI and Check for Updates.

Hi, Running the latest updates for CiscoView, but the Cat3560 fails to load with Dtshare not up to date. System is upto date with all other packages. Thanks C: Users IanADMd: ciscoworks bin psucli -p cvw -install -src d: psu_download cv Services might be restarted, as a result of install operation Would you like to continue? ( Press y or n ) y Proceeding with install. Motomaster Eliminator Battery Booster Pack With Air Compressor Manual. Loaded psu.properties. INFO: Installing for cvw Locking the package repository.

Got all packages Repository Checking Dependencies. WARNING: Cat3560(14.0):Consistency check failed for base package DtShare WARNING: Nexus5000(4.0):Version 4.0 already installed WARNING: SwitchAddlets(1.34):Version 1.34 already installed WARNING: Nexus7000(6.0):Version 6.0 already installed There are no Packages to be installed Released the Lock. No package(s) to install for CiscoView. Hi, I installed Ciscoview 5.4 and RME 3.4 in the same Windows 2000 Server. However, when i activate the Import Device list for CiscoView from RME in the CiscoWorks 2000 server, it always give me this error 'Device Import Software is not present on this server' Possible cause 'Possible due to mistyping of host/port or Device List Software is missing' I have checked ciscoview and RME installed packages. Admin Panel Template In Php. It shows that they both have the same list of supported devices. Has anyone encountered this problem before?

Whats is this device list software. Since it is a WAN link you would not want to have CDP enabled on the interface facing the WAN. Also being a WAN link your service provider is definitely not going to pass through those cdp advertisements. You would need to enter the device manually in your seed file for it to be discoverd. Server Config AniServer admin discovery settings add seed device, or alternately you could go to your CSCO partition /etc/cwsi/aniserver.prop file and manually enter in the device where it says Discovery Seed =. I'm having a problem adding WISM modules to CiscoWorks.

Here is the output from the failed archive management job: *** Device Details for durhq1-cra-wr01 *** Protocol == Unknown / Not Applicable Selected Protocols with order == SSH,Telnet,TFTP Execution Result: CM0056 Config fetch failed for durhq1-cra-wr01 Cause: CM0204 Could not create DeviceContext for 4 Cause: CM0206 Could not get the config transport implementation for 10.72.1.20 Cause: CM0202 Could not access 10.72.1.20 via SNMP. Action: Check the Read Community string Action: Check if required device packages are available in RME. Action: Check if protocol is supported by device and required device package is installed. I'm attaching sysinfo from WISM module. Hi Chris, From the online help: Deleting Devices The DFM Rediscover/Delete Devices page allows you to delete devices from the DFM inventory (local deletion). It does not affect the DCR (all DCR device management is performed from the Common Services home page).